Description :

Easy cap SC temp C&B material plus is a self curing composite material in paste form used for the fabrication of temporary crowns, bridges, inlays, onlays, veneers and post- retained temporary crowns. It is supplied in specially designed cartridges that provide a10:1 base/catalyst ratio.

Instructions :

Technical Info:

• Working Time - Approx. 1 minute room temp, 23°c
• Setting Time - Approx. 1 to 2 minutes at 37°c,  Approx. 3 minutes at room temp 23°c
• Storage temp - 2 - 28°c

Special Notes:

• Uncured materials can be removed using alcohol or similar solvents.
• Alternatively to extruding and discarding pea-sized amount of material prior to each application, extrude just as much base and catalyst until even strands of both pastes are produced before attaching the mixing tip. 

Product Code :	8812
Price (Incl. of Tax) :	3310
Package Contents :	50 ml Cartridge
Min Order :	1 Packet
Available Qty :	106
	3310 3310 Glass Ionomer SELF CURING TEMPORARY CROWN AND BRIDGE MATERIAL A2 Add to Quote

Description :

Easy cap SC Temp C&B Material plus is a self curing composite material in paste from used for the fabrication of temporary crowns, bridges,inlays, onlays, veneers and post - retained temporary crowns, it is supplied in  specially designed Cartridges that provide a 10:1 base/catalyst ratio.

Instructions :

Technical Info :

• Working Time -  Approx. 1 minute room temp 23°c
• Setting Time  - Approx. 1 to 2 minutes at 37°c, Approx. 3 minutes at room temp 23°c
• Storage Temp -  2 - 28°c

Special Notes :

• Uncured materials can be removed using alcohol or similar solvents .
• Alternatively to extruding and discarding pea-sized amount of materials prior to each application, extrude just as much base and catalyst until even strands of both pastes are produced before attaching the mixing tip. 

Product Code :	8813
Price (Incl. of Tax) :	3310
Package Contents :	50 ml Cartridge
Min Order :	1 Packet
Available Qty :	109
	3310 3310 Glass Ionomer SELF CURING TEMPORARY CROWN AND BRIDGE MATERIAL A3 Add to Quote

Advantages :

Fields Application :
Repair of V-shaped defects and enamel root erosion in the dental neck area inclusive class V filling. Restoration of deciduous teeth (especially class I ). Cavity filling of class II (not occlusion -bearing) by means of tunnel preparation. Buildup fillings and linings, core buildup. Temporary long - term treatment of class I class II cavities

Instructions :

I - Fill Filling Molar is a radiopaque glass polyalkenoate (Ionomer) Cement for fillings with chemical adhesion to enamel and dentine and continuously high release of fluoride ions. Available in different shades A2.

Advantages :

Fields of Application : 

For attaching crowns, bridges, inlays, onlays, pins, posts and orthodontic bands.

Method of use :

Clean enamel, dentine and metal surfaces thoroughly and dry completely. Make sure not to leave any traces of other materials which could impair the properties of I-Fitt Luting. Temporary work should be attached with an eugenol-free cement. Before attachment clean the core. rise (e.g. with H₂O₂) and dry.

Instructions :

I - Fitt Luting is a glass ionomer cement (glass polyalkenoate Cement) for luting has a low solubility in the mouth and a low level of acidity.